I think I've finished my first revision

LaTeX/thesis.tex

@@ -1155,9 +1155,9 @@
 				uniform distribution within those bounds.
 
 				A unit launch direction is then also chosen as a 3-length vector of uniform random
-				numbers, then normalized. This unit vector is then multiplied by a uniform random
+				numbers and normalized. This vector is then multiplied by a uniform random number
-				number between 0 and the square root of the maximum launch $C_3$ specified by the
+				between 0 and the root of the maximum launch $C_3$ specified by the user to generate
-				user to generate an initial $\vec{v_\infty}$ vector at launch.
+				an initial $\vec{v}_\infty$ vector at launch.
 
 				Next, the times of flight of each phase of the mission is then decided. Since launch
 				date has already been selected, the maximum time of flight can be calculated by
@@ -1288,17 +1288,17 @@
 				a tuning parameter to determine the size of the tails and width of the distribution
 				set to $1.01$, but easily tunable.
 
-				The perturbation function, then steps through each parameter of the mission,
+				The perturbation function then steps through each parameter of the mission,
-				generating a new mission guess with the parameters modified by the above Pareto
+				generating a new guess with the parameters modified by the Pareto distribution.
-				distribution. After this perturbation, the NLP solver is then called again to find
+				After this perturbation, the NLP solver is then called again to find a valid
-				a valid solution in the vicinity of this new guess. If the solution is better than
+				solution in the vicinity of this new guess. If the solution is better than the
-				the current basin solution, it replaces that value and the drill counter is reset to
+				current basin solution, it replaces that value and the drill counter is reset to
 				zero. If it is better than the current total best, it replaces that value as well.
 				Otherwise, the drill counter increments and the process is repeated. Therefore, the
 				drill patience allows the mission designer to determine a maximum number of
-				iterations to perform without any improvements in a row before ending a given drill
+				iterations to perform without improvement in a row before ending the drill loop.
-				loop. This process can be repeated essentially ''search patience`` number of times
+				This process can be repeated essentially ''search patience`` number of times in
-				in order to fully traverse all basins.
+				order to fully traverse all basins.
 
 	\chapter{Results Analysis} \label{results}
 
@@ -1436,8 +1436,11 @@
 			with Mars after three and one half years to rendezvous in mid-December 2027.
 			Unfortunately, the launch energy required to effectively used the gravity assist with
 			Mars at this time is quite high. The $C_3$ value was found to be $60.4102$ kilometers
-			per second squared. However, for this phase, the thrusters are almost entirely turned
+			per second squared. However, for this phase, the thrust magnitudes are quite low,
-			off, allowing for a nearly-natural trajectory to Mars rendezvous.
+			raising slowly only as the spacecraft approaches Mars, allowing for a nearly-natural
+			trajectory to Mars rendezvous. Note also that the in-plane thrust direction was neither
+			zero nor $\pi$, implying that these thrusts were steering thrusts rather than
+			momentum-increasing thrusts.
 
 			\begin{figure}[H]
 				\centering
@@ -1518,11 +1521,11 @@
 			previous trajectory. However, this time the launch energy is considerably lower, with a
 			$C_3$ value of only $40.4386$ kilometer per second squared. Rather than employ an almost
 			entirely natural coasting arc to Mars, however, this trajectory performs some thrusting
-			at about the apoapsis point of its orbit in order to raise the periapsis enough to
+			almost entirely in the velocity direction, increasing its orbital energy in order to
-			rendezvous at roughly the same incidence angle in Mars' orbit, but one revolution ahead.
+			achieve the same Mars rendezvous. In this case, the launch was a bit earlier, occurring
-			In this case, the launch was a bit earlier, occurring in November of 2023, with the Mars
+			in November of 2023, with the Mars flyby occurring in mid-April of 2026. This will prove
-			flyby occurring in mid-April of 2026. This will prove to be helpful in comparison with
+			to be helpful in comparison with the other result, as this mission profile is much
-			the other result, as this mission profile is much longer.
+			longer.
 
 			\begin{figure}[H]
 				\centering
@@ -1565,9 +1568,11 @@
 
 			Finally, this mission also has a third phase. The Jupiter flyby provides quite a strong
 			$\Delta V$ for the spacecraft, allowing the following phase to largely be a coasting arc
-			to Saturn almost one revolution later. Because of this long coasting period, the mission
+			to Saturn almost one revolution later. During the most efficient part of the journey,
-			length increases considerably during this leg, arriving at Saturn in December of 2037,
+			some thrust in the velocity direction accounts for a little bit of orbit-raising, but
-			over 8 years after the Jupiter flyby.
+			the phase is largely natural. Because of this long coasting period, the mission length
+			increases considerably during this leg, arriving at Saturn in December of 2037, over 8
+			years after the Jupiter flyby.
 
 			However, there are many advantages to this approach relative to the other trajectory.
 			While the fuel use is also slightly higher at $530.668$ kilograms, plenty of payload

julia/ingest_mission.jl

@@ -2,6 +2,7 @@ using Thesis
 using SPICE
 using LinearAlgebra
 using Dates
+using PlotlyJS
 
 try
   furnsh("../../spice_files/naif0012.tls")
@@ -48,16 +49,59 @@ end
 sorted_missions1 = sort(missions, by=cost_1)
 sorted_missions2 = sort(missions, by=cost_2)
 
-println(get_id.(sorted_missions1[1:10]))
+println(get_id.(sorted_missions1[1:5]))
-println(get_id.(sorted_missions2[1:10]))
+println(get_id.(sorted_missions2[1:5]))
 
-display_mission = improve(sorted_missions2[1], n=7)
+# long, short = improve.(sorted_missions2[1:2], n=7)#, use_cost=true)
-# display(plot(display_mission,
+display_mission = long
+
+# Display Orbit Plot
+# display(Thesis.plot(long,
 #              title="Sample Algorithm Result Mission",
 #              mode="light",
 #              planet_colors=false,
 #              phase_colors=["#F00","#F0F","#6AF"],
-#              markers=false));
+#              markers=false,
-display(plot_thrust(display_mission, title="Thrust Magnitude vs Time", mode="light"))
+#              camera=((-0.2, -0.3, -0.2),(1.75,-1.75,1.5))));
-display(plot_thrust_components(display_mission, title="Thrust Components vs Time", mode="light"))
+
+# Save Orbit Plot
+savefig(Thesis.plot(short, title="EMS Mission Profile", mode="light", planet_colors=false,
+                    phase_colors=["#F00","#F0F","#6AF"], markers=false,
+                    camera=((-0.2, 0.1, -0.3),(-2.,-2.,1.))),
+        "/home/connor/projects/thesis/LaTeX/fig/EMS_plot.png",
+        width=850, height=400)
+savefig(Thesis.plot(short, title="EMS Mission Profile", mode="light", planet_colors=false,
+                    phase_colors=["#F00","#F0F","#6AF"], markers=false, planets=false,
+                    camera=((-0.2, 0.1, -0.3),(-2.,-2.,1.))),
+        "/home/connor/projects/thesis/LaTeX/fig/EMS_plot_noplanets.png",
+        width=850, height=400)
+savefig(Thesis.plot(long, title="EMS Mission Profile", mode="light", planet_colors=false,
+                    phase_colors=["#F00","#F0F","#6AF"], markers=false,
+                    camera=((-0.2, -0.3, -0.2),(1.75,-1.75,1.5))),
+        "/home/connor/projects/thesis/LaTeX/fig/EMJS_plot.png",
+        width=850, height=400)
+savefig(Thesis.plot(long, title="EMS Mission Profile", mode="light", planet_colors=false,
+                    phase_colors=["#F00","#F0F","#6AF"], markers=false, planets=false,
+                    camera=((-0.2, -0.3, -0.2),(2.,-2.,1.5))),
+        "/home/connor/projects/thesis/LaTeX/fig/EMJS_plot_noplanets.png",
+        width=850, height=400)
+# Display Thrust Plots
+# display(plot_thrust(display_mission, title="Thrust Magnitude vs Time", mode="light"))
+# display(plot_thrust_components(display_mission, title="Thrust Components vs Time", mode="light"))
+
+# Save Thrust Plots
+savefig(plot_thrust(short, title="Thrust Magnitude vs Time", mode="light"),
+        "/home/connor/projects/thesis/LaTeX/fig/EMS_thrust_mag.png",
+        width=850, height=400)
+savefig(plot_thrust_components(short, title="Thrust Components vs Time", mode="light"),
+        "/home/connor/projects/thesis/LaTeX/fig/EMS_thrust_components.png",
+        width=850, height=400)
+savefig(plot_thrust(long, title="Thrust Magnitude vs Time", mode="light"),
+        "/home/connor/projects/thesis/LaTeX/fig/EMJS_thrust_mag.png",
+        width=850, height=400)
+savefig(plot_thrust_components(long, title="Thrust Components vs Time", mode="light"),
+        "/home/connor/projects/thesis/LaTeX/fig/EMJS_thrust_components.png",
+        width=850, height=400)
+
+# Save mission
 # store(display_mission, "/home/connor/projects/thesis/archive/best/long_mission")

julia/porkchop.jl

@@ -0,0 +1,7 @@
+using Dates
+using Thesis
+
+departures = collect(DateTime(2023,7,1):Dates.Day(1):DateTime(2023,12,1))
+arrivals = collect(DateTime(2025,6,1):Dates.Day(1):DateTime(2026,1,1))
+p = porkchop(Earth, Mars, departures, arrivals)
+display(p);

julia/src/types/mission.jl

@@ -344,7 +344,7 @@ end
 """
 Increases the fidelity of a mission by using it as a base and resolving with increased number of points
 """
-function improve(mission::Mission; n::Int=5)
+function improve(mission::Mission; n::Int=5, use_cost=false)
   new_phases = Vector{Phase}()
   for phase in mission.phases
     new_thrusts = repeat(phase.thrust_profile, inner=(n,1))
@@ -366,7 +366,8 @@ function improve(mission::Mission; n::Int=5)
     arrival + Dates.Day(7),
     200.,
     20.,
-    CPU_multiplier = 30.
+    CPU_multiplier = 60.,
+    use_cost=use_cost,
   )
   new_mission.converged || error("Mission improvement failed")
   return new_mission

julia/src/utilities/conversions.jl

@@ -1,4 +1,4 @@
-export oe_to_rθh, rθh_to_xyz, oe_to_xyz, xyz_to_oe, conv_T, spiral, gen_orbit
+export oe_to_rθh, rθh_to_xyz, oe_to_xyz, xyz_to_oe, xyz_to_rθh, conv_T, spiral, gen_orbit
 
 function oe_to_rθh(oe::Vector,μ::Real) :: Vector
 
@@ -25,6 +25,18 @@ function rθh_to_xyz(rθh_vec::Vector,oe::Vector)
 
 end
 
+function xyz_to_rθh(xyz_vec::Vector,oe::Vector)
+
+  a,e,i,Ω,ω,ν = oe
+  θ = ω+ν
+  cΩ,sΩ,ci,si,cθ,sθ = cos(Ω),sin(Ω),cos(i),sin(i),cos(θ),sin(θ)
+  DCM = [cΩ*cθ-sΩ*ci*sθ -cΩ*sθ-sΩ*ci*cθ sΩ*si;
+  sΩ*cθ+cΩ*ci*sθ -sΩ*sθ+cΩ*ci*cθ -cΩ*si;
+  si*sθ si*cθ ci]
+  return inv(DCM)*xyz_vec
+
+end
+
 function oe_to_xyz(oe::Vector,μ::Real)
 
   return rθh_to_xyz(oe_to_rθh(oe,μ),oe)

julia/src/utilities/lamberts.jl

@@ -1,3 +1,5 @@
+export lamberts, porkchop
+
 """
 I didn't want to have to write this...I'm going to try to do this as quickly as possible from old,
 bad code
@@ -68,3 +70,47 @@ function lamberts(planet1::Body,planet2::Body,leave::DateTime,arrive::DateTime)
   return v0t - state1[4:6], vft - state2[4:6], tof_req
 
 end
+
+function porkchop(planet1::Body, planet2::Body, departures::Vector{DateTime}, arrivals::Vector{DateTime})
+  v∞_in = [ norm(lamberts(planet1, planet2, depart, arrive)[2]) for depart in departures, arrive in arrivals ]
+  v∞_out = [ norm(lamberts(planet1, planet2, depart, arrive)[1]) for depart in departures, arrive in arrivals ]
+  c3 = [ norm(lamberts(planet1, planet2, depart, arrive)[1])^2 for depart in departures, arrive in arrivals ]
+  traces = Vector{PlotlyJS.AbstractTrace}()
+  outputs = (v∞_in, v∞_out)
+  names = ("Earth Departure v∞", "Mars Arrival v∞")
+  colors = ("#0A0", "#A0A")
+  for (output, name, color) in zip(outputs, names, colors)
+    push!(traces, contour(x=departures,
+                          y=arrivals,
+                          z=output,
+                          name=name,
+                          contours_coloring="none",
+                          contours_showlabels=true,
+                          contours_start=12,
+                          contours_end=20,
+                          contours_size=2,
+                          line_color=color,
+                          line_width=2,
+                          showscale=false,
+                         ))
+    push!(traces, contour(x=departures,
+                          y=arrivals,
+                          z=output,
+                          showlegend=false,
+                          contours_coloring="none",
+                          contours_showlabels=true,
+                          contours_start=0,
+                          contours_end=10,
+                          contours_size=1,
+                          line_color=color,
+                          line_width=2,
+                          showscale=false,
+                         ))
+  end
+  layout = Layout(title_text="Sample Porkchop Earth->Mars Plot",
+                  xaxis_title="Departure Date",
+                  yaxis_title="Arrival Date",
+                  margin_l=120,
+                 )
+  return PlotlyJS.plot(traces, layout)
+end

julia/src/utilities/plotting.jl

@@ -309,7 +309,10 @@ function plot(m::Union{Mission, Mission_Guess};
               mode::String="dark",
               planet_colors=true,
               phase_colors=nothing,
-              markers=true)
+              markers=true,
+              planets=true,
+              camera=nothing,
+  )
   # First plot the earth
   # Then plot phase plus planet phase
   time = datetime2julian(m.launch_date)
@@ -325,7 +328,11 @@ function plot(m::Union{Mission, Mission_Guess};
     end
   end
   start = state(current_planet, time, m.launch_v∞, mass)
-  traces = [ earth_trace... ]
+  if planets
+    traces = [ earth_trace... ]
+  else
+    traces = Vector{PlotlyJS.AbstractTrace}()
+  end
 
   i = 1
   for phase in m.phases
@@ -365,8 +372,10 @@ function plot(m::Union{Mission, Mission_Guess};
                                            color="#000")
       end
     end
-    push!(traces, planet_trace...)
+    if planets
-    limit = max(limit, new_limit)
+      push!(traces, planet_trace...)
+      limit = max(limit, new_limit)
+    end
 
     i += 1
   end
@@ -376,6 +385,14 @@ function plot(m::Union{Mission, Mission_Guess};
 
   # Determine layout details
   layout = standard_layout(limit, title, mode=mode)
+  if camera !== nothing
+    layout["scene_camera_center_x"] = camera[1][1]
+    layout["scene_camera_center_y"] = camera[1][2]
+    layout["scene_camera_center_z"] = camera[1][3]
+    layout["scene_camera_eye_x"] = camera[2][1]
+    layout["scene_camera_eye_y"] = camera[2][2]
+    layout["scene_camera_eye_z"] = camera[2][3]
+  end
 
   # Plot
   PlotlyJS.plot( PlotlyJS.Plot( traces, layout ) )
@@ -410,30 +427,40 @@ function plot_thrust(m::Union{Mission, Mission_Guess};
                      title::String="Mission Plot",
                      mode::String="dark",
                      )
-  times = Vector{Float64}()
+  times = Vector{String}()
   vals = Vector{Float64}()
   time = datetime2julian(m.launch_date)
   start = state(Earth, time, m.launch_v∞, m.start_mass)
+  traces = Vector{PlotlyJS.AbstractTrace}()
+  limits = Vector{Float64}()
   for phase in m.phases
-    # First get the path
+    n = size(phase.thrust_profile)[1]
+    for i in 1:n
+      push!(times, format(julian2datetime(time + i*phase.tof/(86400n)),"yyyy-mm-dd HH:MM:SS"))
+      push!(vals, norm(phase.thrust_profile[i,:]))
+    end
     path = prop(phase.thrust_profile, start, m.sc, phase.tof)
     time += phase.tof/86400.
+    time_string = format(julian2datetime(time),"yyyy-mm-dd HH:MM:SS")
+    push!(traces, scatter(;x=[time_string, time_string],
+                          y=[-1.0,1.0],
+                          mode="lines",
+                          line_color="#000",
+                          name=phase.planet.name*" Flyby"))
     mass = path[end,end]
     start = state(phase.planet, time, phase.v∞_out, mass)
-    n = size(phase.thrust_profile)[1]
-    println(n)
-    for i in 1:n
-      push!(times, time + i*phase.tof/(86400n))
-      push!(vals, norm(phase.thrust_profile[i]))
-    end
   end
-  trace = scatter(;x=times, y=vals)
+  push!(traces, scatter(;x=times, y=vals, name="Thrust Mag"))
 
   # Determine layout details
-  layout = Layout(;title=title, xaxis_title="Time (JD)", yaxis_title="Thrust (% of Max)")
+  layout = Layout(;title=title,
+                  xaxis_title="Year",
+                  yaxis_title="Thrust (% of Max)",
+                  yaxis_range=[0.0,maximum(vals)*1.02],
+                  )
 
   # Plot
-  PlotlyJS.plot( PlotlyJS.Plot( [trace], layout ) )
+  PlotlyJS.plot( PlotlyJS.Plot( traces, layout ) )
 
 end
 
@@ -441,37 +468,50 @@ function plot_thrust_components(m::Union{Mission, Mission_Guess};
                                 title::String="Mission Plot",
                                 mode::String="dark",
                                 )
-  times = Vector{Float64}()
+  traces = Vector{PlotlyJS.AbstractTrace}()
-  vals1 = Vector{Float64}()
+  times = Vector{String}()
-  vals2 = Vector{Float64}()
+  xs = Vector{Float64}()
-  vals3 = Vector{Float64}()
+  ys = Vector{Float64}()
+  zs = Vector{Float64}()
+  αs = Vector{Float64}()
+  βs = Vector{Float64}()
   time = datetime2julian(m.launch_date)
   start = state(Earth, time, m.launch_v∞, m.start_mass)
   for phase in m.phases
-    # First get the path
+    n = size(phase.thrust_profile)[1]
     path = prop(phase.thrust_profile, start, m.sc, phase.tof)
+    for i in 1:n
+      push!(times, format(julian2datetime(time + i*phase.tof/(86400n)),"yyyy-mm-dd HH:MM:SS"))
+      push!(xs, phase.thrust_profile[i,1])
+      push!(ys, phase.thrust_profile[i,2])
+      push!(zs, phase.thrust_profile[i,3])
+      r, θ, h = xyz_to_rθh(phase.thrust_profile[i,1:3], xyz_to_oe(path[i+1,1:6],Sun.μ))
+      β = asin(h)
+      α = atan(r/cos(β),θ/cos(β))
+      push!(αs, α)
+      push!(βs, β)
+    end
     time += phase.tof/86400.
+    time_string = format(julian2datetime(time),"yyyy-mm-dd HH:MM:SS")
+    push!(traces, scatter(;x=[time_string, time_string],
+                          y=[-10.0,10.0],
+                          mode="lines",
+                          line_color="#000",
+                          name=phase.planet.name*" Flyby"))
     mass = path[end,end]
     start = state(phase.planet, time, phase.v∞_out, mass)
-    n = size(phase.thrust_profile)[1]
-    println(n)
-    for i in 1:n
-      push!(times, time + i*phase.tof/(86400n))
-      push!(vals1, phase.thrust_profile[i,1])
-      push!(vals2, phase.thrust_profile[i,2])
-      push!(vals3, phase.thrust_profile[i,3])
-    end
   end
-  trace1 = scatter(;x=times, y=vals1, name="x component")
+  push!(traces, scatter(;x=times, y=αs, name="in-plane angle"))
-  trace2 = scatter(;x=times, y=vals2, name="y component")
+  push!(traces, scatter(;x=times, y=βs, name="out-of-plane angle"))
-  trace3 = scatter(;x=times, y=vals3, name="z component")
 
   # Determine layout details
   layout = Layout(;title=title,
-                  xaxis_title="Time (JD)",
+                  xaxis_title="Year",
-                  yaxis_title="Thrust (% of Max)")
+                  yaxis_title="Thrust Angle (Radians)",
+                  yaxis_range=[min(minimum(αs),minimum(βs))*1.02,max(maximum(αs),maximum(βs))*1.02],
+                  )
 
   # Plot
-  PlotlyJS.plot( PlotlyJS.Plot( [trace1, trace2, trace3], layout ) )
+  PlotlyJS.plot( PlotlyJS.Plot( traces, layout ) )
 
 end

notes.md

@@ -64,8 +64,9 @@ Todo:
 - [x] Include how mass is being decremented in the SFT propagator section
 - [ ] Think about how to include plots that show the MBH algorithm jumping through the space and looking
     at various basins.
+- [ ] Porkchop plot
 - [x] Include some plots of the thrust vectors rather than the raw data in the appendix
-    - [ ] Format dates better and include lines where the flybys are
+    - [x] Format dates better and include lines where the flybys are
-    - [ ] Reconsider wording on analysis
+    - [x] Reconsider wording on analysis
-    - [ ] Reconsider plotting the angles instead
+    - [x] Reconsider plotting the angles instead
 - [ ] Submit thesis defense form